Lucent Technologies 555-670-111 ユーザーズマニュアル

Issue 1

April 1999

Programming Procedures 

3-579

Uniform Dial Plan Routing 

10. Return to the System Programming menu.

Select 

Exit

 twice.

3

This section includes programming procedures for assigning Uniform Dial Plan 
(UDP) Routing, available for Hybrid/PBX mode in Release 6.0 and later systems 
only. 

UDP Routing is very similar to Automatic Route Selection (ARS). UDP Routing 
allows system users to reach non-local extensions at a remote DEFINITY or 
MERLIN LEGEND Communications System that is connected to the local system 
in a private network. Users simply dial the non-local extension number as they 
would an inside extension number. Then UDP Routing associates the dialed 
extension number with one of up to 20 programmed patterns. For each pattern, 
you can specify up to four routes. For each route, you specify a pool dial-out code. 
Then you can program Facility Restriction Levels (FRLs), absorbed digits, added 
digits, and voice and/or data capability.

Before assigning routes, patterns must be assigned to non-local 
extensions, which is part of the numbering of the extensions. To perform 
this procedure, see 

This section contains programming procedures for the following UDP Routing 
features:

■

UDP Pool Routing

■

Facility Restriction Level (FRL)

■

Digit Absorption

■

Other Digits

■

Voice and/or Data Routing

Do not include the ARS codes of non-local systems in the non-local dial 
plan, or calling restrictions may be violated.

Refer to the 

Network Reference for additional information.