Honeywell VISTA128BPT/ ユーザーズマニュアル
– 56 –
Using #77 Instant Activation Mode (cont’d)
Additional Commands
Action Code Action
Specifier
77
Access Point Group Enable
Group #
78
Access Point Group Disable
Group #
To enter the Instant Activation Mode:
Enter your security code, then press the # key followed by 77.
ACTION
?
Enter the code for the desired action. The
action codes are the events that are to take place
when either the system exits the #77 Mode or the
scheduled time is reached, depending on the action
selected.
action codes are the events that are to take place
when either the system exits the #77 Mode or the
scheduled time is reached, depending on the action
selected.
Press [
✳] to continue.
Enter the action specifier. This defines what the
action will affect (relay, relay group, partition, zone
list, user group). The action specifier screen prompt
varies, depending on the type of action selected.
action will affect (relay, relay group, partition, zone
list, user group). The action specifier screen prompt
varies, depending on the type of action selected.
As an example, if you selected “Auto Bypass” as the
action, the action specifier prompt would be:
action, the action specifier prompt would be:
ZONE LIST ?
ARE YOU SURE ?
1 = YES 0 = NO
1 = YES 0 = NO
0
Enter 1 (YES) or 0 (NO).
Press [
✳] to continue.
QUIT MENU MODE?
1 = YES 0 = NO
1 = YES 0 = NO
Enter 1 (YES) or 0 (NO).
Press [
✳] to continue.