Honeywell VISTA-250FBP ユーザーズマニュアル

 

Displaying Event  

The system is programmed to lock the keypad display with the first event that 
occurred in priority order.  

1.  Fire – highest priority 

2.  Life Safety  

3. Troubles 

and 

Supervisory 

4.  System Events (i.e. low battery) – lowest priority 

To display the next event, press the [*] key.  Repeat as necessary.   
To revert to the first event displayed, press the # key.   

Silencing Fire Alarms 

Enter User Code +1 (OFF).  This will silence the keypad, but may or may not 
silence the fire bells, depending on system programming.  A second User Code 
+ 1 (OFF) sequence may be required. The Silenced LED on the 6160CR-2 
keypad will light. 

Resetting Alarms 

To reset alarms, enter User Code + 1 (OFF) a second time.  This will clear 
alarms from memory. 

Silencing Troubles and 
Supervisory Conditions 

To Silence Troubles or Supervisory Conditions, enter User Code +1 (OFF).  The 
corresponding LED on the 6160CR-2 keypad will light. 

Resetting Troubles and 
Supervisory Conditions 

Troubles and supervisory conditions automatically reset when the condition is 
cleared if programmed by your installer.  Otherwise reset the condition by 
entering Code + 1 (OFF).