Manitowoc Ice 7623833 プリント

                                                                           

Kit Includes: 
 
Item  

Description 

 

 

 

       Quantity Part Number 

   1 

Fan Motor 

1 

2412553 

   2 

 

Fan Blade 

 

 

 

 

1 

      2416113 

   3 

 

Base Bracket    

 

 

 

2 

      6008901 

   4 

Slinger  

 

 

 

 

1 

      2415053 

   5 

 

Electrical Cover  

 

 

 

1 

      6629914 

   6 

 

Cable Tie 

 

 

 

 

2 

      5650423 

   7 

 

5/16-18 Hex Head Machine Screw 

 

4 

      5035651 

   8 

 

5/16 Lockwasher 

 

 

 

4 

      5573131 

   9 

 

5/16 Flatwasher  

 

 

 

4 

      5573091 

 10 

 

5/16-18 Hex Nut 

 

 

 

4 

      5429751 

 11 

 

#10-24 Ground Screw   

 

 

2 

      5202163 

 12 

 

#10 Starwasher  

 

 

 

2 

      5573203 

 13 

 

#10-24 Thread Cutting Screw   

        10 

      5202063 

 14 

 

Instruction Sheet 

 

 

 

1 

      8008133 

 15 

 

Label - Danger   

 

  

 

1 

      8130321 

 16 

 

Label - Caution  

 

 

 

1 

      8130361 

 17 

 

Strain Relief Bushing   

 

 

1 

      2512033 

 
ALL WIRING MUST COMPLY WITH LOCAL AND NATIONAL ELECTRICAL CODES 
1.  Disconnect electrical power to the ice machine and the remote condenser. 
2.  Remove the old capacitor and bracket and the fan motor and mounting bracket assembly. 
3.  Drill four 7/32" diameter holes in the front panel and four 7/32" diameter holes in the back panel for mounting the 

new fan motor brackets, as shown on Sheet 3, Illustration A. 

4.  Assemble the slinger (Item 4) to the fan motor (Item 1) and then the fan blade (Item 2) over the slinger.  Fasten the 

motor assembly to the motor mounting brackets with the four 5/16" machine screws, washers, and nuts (Items 7, 8, 9, 
10), as shown on Sheet 3, Illustration A. 

5.  Mount the motor and bracket assembly in the condenser using the four #10-24 thread cutting screws (Item 13), as 

shown on Sheet 3, Illustration A.    Note:    Once the fan motor is mounted, the fan blade should be two thirds into 
the shroud opening in the top cover. 

6.  Use the cable ties (Item 6) to clamp the fan motor wires to the mounting brackets, as shown on Sheet 3, Illustration B. 
7.  Insert the fan motor wires through the bushing (Item 17) and snap bushing in the 7/8" diameter hole in the motor 

mounting bracket, as shown on Sheet 3, Illustration B. 

8.  Ground the fan motor and field wiring by connecting the green ground wires to the motor mounting bracket with the 

#10-24 ground screws and starwashers (Items 11 and 12), as shown on Sheet 3, Illustration B.  Note:  The 
starwashers should be placed between the bracket and the eyelet on the wire to insure grounding. 

10.  Connect the fan motor wires with the field wiring, as shown  on the wiring diagram label on the back panel of the 

remote condenser. 

11.  Place the labels (Items 15 and 16) on the electrical cover (Item 5) and fasten the cover in place over the brackets and 

wiring with two #10-24 thread cutting screws (Item 13), as shown on Sheet 3, Illustration B. 

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI  54221-1720 USA                                                                                                             
8008133                                            
Telephone 920-682-0161, Fax - Sales:    920-683-7589, Service/Parts: 920-683-7585,    Other:  920-683-7879                                                        
Sheet 1 of 1 
Web Site - 

www.manitowocice.com

                                                                                                                                                                                                                                                     

Rev. 05/03/99