Hunter Fan 42856-01 ユーザーズマニュアル

42856-01  •  01/30/09  •  Hunter Fan Company

1. Turn power on, replace fuse, or reset breaker.
2. Loosen canopy, check all connections according to the wiring the 

fan section.

3. Check the plug connection in the switch housing.
4. Push motor reversing switch firmly left or right to ensure that the 

switch is engaged.

5. Pull the pull chain to ensure it is on.
6. Remove the shipping bumpers.

1. Tighten the blade bracket screws until snug.
2. Tighten the blade screws until snug.
3. Check to see if the blade is cracked.  If so, replace all the blades.
4. Change to an approved speed control.
5. Be sure that the glass is secure.
6. Check and tighten the screws in the switch housing mounting 

plate and in the upper and lower switch housing.

1. If your fan wobbles when operating, use the enclosed balancing kit 

and instructions to balance the fan.

2. Tighten all blade and/or blade iron screws.

1. Check to make sure wattage of light bulbs installed match the 

specifications on the light socket.

If you need parts or service assistance, please call 
888-830-1326 or visit us at our Web site at  
http://www.hunterfan.com.

Hunter Fan Company
7130 Goodlett Farms Pkwy.
Memphis, Tennessee 38016