Hunter Fan 53055 ユーザーズマニュアル

www.HunterFan.com

1.888.830.1326

M0010-01 • 11/02/12 • © Hunter Fan Company

•  Tighten all of the blade and 

blade iron screws until they 
are snug.

•  Use the provided balancing 

kit and instructions to balance 
the fan.

•  Tighten the blade and blade 

iron screws until they are snug.

•  Check to see if any of the 

blades are cracked. If so, replace 
all of the blades.

•  Make sure power switch is on.

•  Pull the pull chain to make sure 

it is on.

•  Push the motor reversing switch 

firmly left or right to ensure that 
it is engaged.

•  Check the circuit breaker to 

ensure the power is turned on.

•  Make sure the blades spin freely.

•  Turn off power from the circuit 

breaker, then loosen the canopy 
and check all the connections 
according to the wiring diagram 
on page 7.

•  Check the plug connection in 

the switch housing.