Hearth & Home Technologies Cinch Pipe & Termination Cap System ユーザーズマニュアル
Hearth & Home Technologies Inc. • Cinch Pipe & Term Caps • 4033-900 Rev K • 05/05
1
TM
TM
Models:
Cinch Pipe & Termination Cap System
Cinch Pipe & Termination Cap System
Installation
Instructions
If you need assistance during installation, contact your local dealer or the Technical Serices Dept., Hearth & Home Technologies
Inc., phone 1-800-927-6841 or 1-888-427-3973.
Inc., phone 1-800-927-6841 or 1-888-427-3973.
Note: An arrow (
) found in the text signifi es change in content.
Sharp Edges
• Wear protective gloves and safety glasses
• Wear protective gloves and safety glasses
during installation.
CAUTION
These instructions are replacing VP (for Heatilator) and DV (for Heat-N-Glo) pipe assembly
instructions. See the appliance installation instructions for confi guration of vent assembly
and clearances to pipe.
instructions. See the appliance installation instructions for confi guration of vent assembly
and clearances to pipe.
If DVP-AD adapters are used off the top of the appliance, the termination height will be raised by 2-3/4 in. overall
height.
height.
Hearth & Home Technologies disclaims any
responsibility for, and the warranty will be
voided by, the following actions:
responsibility for, and the warranty will be
voided by, the following actions:
•
Installation and use of any damaged vent
system component.
system component.
• Modifi catoin of the vent system.
• Installation other than as instructed by
• Installation other than as instructed by
Hearth & Home Technologies.
•
Installation and/or use of any component
part not approved by Hearth & Home
Technologies.
part not approved by Hearth & Home
Technologies.
Any such action may cause a fi re hazard.
WARNING
Do not mix pipe, fittings or joining
methods from different manufacturers.
methods from different manufacturers.
WARNING