Hearth & Home Technologies CFX-Crescent ユーザーズマニュアル

Heat & Glo  •  CFX-CRESCENT  •  705-900  Rev. P  •  12/07

27

WARNING: To secure proper
clearances the front framing
header must be installed on
its narrow edge and to the
front of the frame.

To properly position, level,
and secure the fireplace:

1. Place the fireplace into

position.

2. Level the fireplace from

side to side and from
front to back.

3. Fold out top four framing

tabs to be flush with (2)
bottom tabs as shown
(Figure 21).

4. Secure the fireplace to

the framing by nailing or
screwing to all six fram-
ing tabs.

NOTE: Before positioning
fireplace into framing re-
move Finishing Strips that
are secured to right side
of fireplace. The strips will
be used in the finishing
process. Refer to Finish-
ing Variations addendum
included in manual bag.

The gas control system
used with this model is
Intermittent Pilot Ignition
(IPI). This system in-
cludes a 3V control valve.
electronic module, and
intermittent pilot.