Hearth & Home Technologies COLBAY-FS-B ユーザーズマニュアル

Page  30

10/08

Quadra-Fire  •  Columbia Bay  •  250-5195 Rev. K

Place right and left front logs on burner in the grooves 

provided on the burner surface. 

•  Follow ember placement instructions in 

manual.

•  Do NOT place embers directly over 

burner ports.

•  Replace ember material annually.

Explosion  Risk.

Improperly placed embers interferes with proper burner 
operation.

Place twig over the locator pin on the rear log, 

gently laying the log across the two front logs.

  To complete 

your log set application reinstall the front of the unit.

Remove the grille: Slide the grille out of the slots in the exist-
ing door.

Remove the existing door from the appliance.

Remove the crown from the existing door by removing four 
screws on the back side of the door assembly.  Pull crown 
off door face.

Install replacement door with glass onto appliance.

Reinstall the crown.

Reinstall the grille onto the new door assembly.

Handle glass assembly with care.

•  Inspect the gasket to ensure it is undamaged.
•  Inspect the glass for cracks, chips or 

scratches.

•  Do NOT strike, slam or scratch glass.
•  Do NOT operate appliance with glass door 

removed, cracked, broken or scratched.

•  Replace glass assembly as a complete 

assembly.

   Place individual pieces of embers in front of and 

around the gas log where they can be seen. Space them so 

that gas can contact them on all sides. Avoid stacking the 
embers on top of each other. 

NOTE: Do not block gas ports.