Hearth & Home Technologies HUDBAY-FS ユーザーズマニュアル

Page  22

10/08

Quadra-Fire  •  Hudson Bay  •  7003-121 Rev. i

Before making gas connections ensure that the appliance 
being installed is compatible with the available gas type.

Any natural or propane gas conversions necessary to meet 
the appliance and locality needs must be made by a quali-
fi ed technician using Hearth & Home Technologies specifi ed 
and approved parts.

   

Remove right and left twigs and right and left rear 

logs from the burner pan, if installed.  Remove the 2 nuts 
that secure the burner pan to the burner support with the 
ratchet and socket.

   

Lift burner up and out of the fi rebox opening. 

   

Remove the three screws on the front of the burner 

support.  Set screws aside.

   

Slide the burner support to the left to access the 

orifi ce. 

KIT CONTENTS:  Replacement orifi ce; replacement pilot 
injector; and valve regulator.

TOOLS REQUIRED: Ratchet with 7/16 in. socket and 2 in. 
- 4 in. extension: power drill (a 90° handle is helpful); #2 
Phillips bit; 5/32 in. allen wrench; 5/8 in. open end wrench.

2 nuts holding 
burner pan 

3 screws

Burner support 
screws locations