Honeywell S7999B ユーザーズマニュアル

3

65-0303—05

The software upgrade is automatic after the above steps. The 

OI Display connects to the Honeywell server, which verifies the 

configuration file, erases the old application and downloads the 

new one.

The OI Display may have difficulty finding the new 

configuration file at first. In this case, the procedure 

automatically starts over again until it works.

Software upgrades for S7999C OI Display (when needed) will 

be provided by Honeywell and are accomplished through the 

MMC port located on the top back of the device.

+12 Vdc input, maximum of 500 mA current drain.

Included Power Supply for S7999B:

Inputs: 85 to 264 Vac, 47 to 63 Hz; 120 to 370 Vdc.

Output: 12 Vdc; 0 to 2.1 A.

Power: 25 W.

Included Power Supply for S7999C:

Inputs: 100 to 240 Vac.

Output: 12 Vdc; 0.42 A.

Power: 25 W.

Operating Temperature:  32°F to 122°F (0°C to 50°C)

Storage/Shipping Temperature: -40°F to 158°F

 (-40°C to 70°C).

85% maximum relative humidity.

FCC Part 15, Class A Digital Device

Underwriter’s Laboratories, Inc. (UL) (cUL) Component 

Recognized (for non-continuous operation): File Number 

MH20613 (MCCZ)

Canada: ICES-003

Dimensions:  See Fig. 1.

• 9-pin connector—50020034-001

• Power Supply—Manufactured by MeanWell,

Model S-25-12 (order from manufacturer).

• #6-32 X1-in. screws(4) with nuts (4)

• Mounting Plate - see Fig. 9 for dimensions and hole 

locations.

• #6-32 X 1-in. screws (4) with nuts (4)

• Standoffs 5/16-in. dia. X 3/8 in. long (4)

• Power Supply—Manufactured by V-infinity

Model FSC-S5-12U (order from manufacturer).

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment 

is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if 

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica-

tions. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be 

6-21/32

(169)

9-7/16 (240)

7-19/32 (193)

1-33/64 

(39)

M29867A

PANEL HOLE CUTOUT SIZE 7-19/32 (193) WIDE X 5-13/32 (137) HIGH FOR S7999B DISPLAY 7.6 WIDE X 5.4 HIGH..

1

1

5-13/32

(137)

1

8-15/16 (227)

3-1/2

(89)