Honeywell MS-9600LSE ユーザーズマニュアル

168

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

Operating Instructions

The Annunciator Screen indicates if Terminal mode options are enabled or disabled.  

Pressing 2 for ACS Options while viewing the Annunciator Screen allows the operator to view the 
ACS Options screen:

The ACS Options screen indicates if the ACS option has been enabled YES or disabled NO.

Pressing 2 for ACS Addresses while viewing the ACS Options screen will display screens with 
ACS addresses 1 -31 and whether a device is installed at that address YES or not installed NO.

The ACS Options screen indicates if a UDACT is installed YES or if a UDACT is not installed NO.

Pressing 3 for ANN-BUS Options while viewing the Annunciator Screen will display the following 
screens:

The ANN-BUS Screen #1 indicates if the ANN-BUS has been enabled YES or disabled NO.

Pressing 2 for Modules Installed while viewing ANN-BUS Screen #1 will display screens for 
ANN-BUS Addresses 1 -8 and the devices installed at each address.  Subscreen will display the 
options that have been programmed for each device.

Pressing 3 for ANN-S/PG Options while viewing ANN-BUS Screen #1 will display the options 
selected for the installed serial or parallel printer.

Pressing 1 for ANN-80 Options while viewing ANN-BUS Screen #2 will display the options 
selected for the installed ANN-80 annunciators.

    ACS OPTIONS

  ACS ENABLED     NO

2=ACS ADDRESSES

  UDACT ENABLED   NO

      ANN-BUS

  ENABLED         NO

2=MODULES INSTALLED

3=ANN-S/PG OPTIONS

      ANN-BUS

1=ANN-80 OPTIONS