Samsung HT-X50 ユーザーズマニュアル

Press the 

button to open the disc tray.

Load a disc.

■

Place a disc gently into the tray with the disc’s label facing up.

Press the 

button.

■

Rotate the carousel tray so you can load the third, fourth, and fifth discs.

Close the compartment by pressing the 

button again.

■

Playback starts automatically.

• Depending on the content of the disc, the initial screen may appear different. 
• 

Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system)
recommendations.

To stop playback, press the 

button during playback.

■

If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory. 

If the 

button or 

button is pressed, playback resumes from the stop position.

(This function works only with DVDs.)

■

If pressed twice, <

> is displayed, and if the 

button is pressed, playback starts from 

the beginning.

To temporarily pause playback, press the 

button during playback.

■

To resume playback, press the 

button again.

To select a specific disc, press the corresponding the 

buttons on the front panel or the 

button on the remote control, until 

the required disc indicator flashes. 

If the disc selected is not loaded, the next disc is played automatically.

Plug the main unit's power cord into the AC power supply. 

■

Before plugging your system into a main socket, you must check the voltage setting
(OPTIONAL). If the voltage of the socket does not correspond to the setting on the rear of
the unit, you may seriously damage your system.

Press the 

button to set the remote to TV mode.

Press the 

button to turn on your Samsung TV 

with this remote.

Press the 

button to select VIDEO mode on your TV.

Press the 

button to switch to DVD RECEIVER mode to

operate the DVD Home Theater

Press the 

button on the main unit or 

button 

on the remote to enable DVD/CD playback.

VIDEO