Mitsubishi Electronics 838 SERIES ユーザーズマニュアル

All Models.  Connect the camera to the TV using a 
composite video cable and control the slide show or 
movie through the camera.  The display resolution will 
be standard-definition (480i).

Refer to the owner’s manual supplied with the 
camera for instructions needed for this setup.

Set the camera’s output signal type to 

NTSC and 

put the camera into playback mode.

With the camera still turned on, connect your digital 
camera’s composite video cable (usually yellow) to 
the TV’s 

Y/VIDEO jack.  To hear audio, connect the 

camera’s audio output cable to the 

AUDIO L jack.

When the 

New Device Found screen displays, 

assign the name 

Camcorder.

Press 

EXIT to close the New Device Found screen.

Highlight the icon for the camera input and press 
ENTER.

If viewing photos, control the slideshow from the 
camera.  Advance through the images manually or 
check if the camera can advance automatically.

All Models.  To use the TV speakers with an audio 
device such as an MP3 or CD player with analog output, 
follow these steps.

Insert an unused RCA-style connector into the 
Y/VIDEO jack associated with the TV’s analog audio 
input.  The presence of this connector activates the 
TV’s auto-detection.

When the TV detects the 

Y/VIDEO connector, it will 

display the 

New Device Found screen.  Name the 

new input 

CD/Audio or MP3 Player.

Connect left (white) and right (red) audio cables 
from 

AUDIO OUT on the device to AUDIO L and R on 

the TV.

Keep the connector in the 

VIDEO/Y jack while using 

the audio-only device.