Runco X-200i ユーザーズマニュアル

Table 3-1 gives a quick overview of the X-200i installation process. The sections following 
this one provide detailed instructions. 

Choose a location for the projector

Install CineWide lens mounting assembly (stationary base plate or 
AutoScope lens motor – optional) 

Mount the projector

Connect signal sources to the X-200i

Connect external controller to RS-232 port; connect IR repeater 
system to wired remote input (optional)

Connect 12-volt trigger output to retractable screen or other, 
+12V trigger-activated equipment (optional)

Connect the Active 3D Emitter to the projector

Apply power to the projector 

Primary lens adjustments: projected image size (zoom), position 
(shift) and focus

Change the OSD Language (optional)

For rear-screen and/or ceiling-mount installations, select the 
proper picture orientation 

Install and adjust secondary anamorphic lens (optional)

Projector calibration: adjust the following for each input; save 
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position

Prepare Active 3D Glasses for use and test with 3D source mate-
rial