Honeywell CT3455 ユーザーズマニュアル

Adaptive Intelligent
   Recovery™ ....................... 7,8
Batteries, installation .............. 6
Batteries, replacement ........ 6,7
Blinking display ....................... 6
Canceling programs ............. 15
Change temperature ............. 15
Checking current setting ....... 15
Clock display ........................ 19
Conventional Recovery ....... 7,8
Cooling
   temperatures ........ 9,11,12,14
Current setting ...................... 15
Customer Assistance ............ 35
Day ........................................ 13
DAYTIME .................... 13,14,15
Energy-saving
   temperature ......................... 9
EVENING .................... 13,14,15
Fan operation switch ............ 20

33

69-0733—3

Fan switch ............................. 29
Flashing display ...................... 6
Heating
   temperatures ........ 9,11,12,13
Hold temperature .................. 15
MORNING ....................... 13,14
NIGHT ......................... 13,14,15
Operation .............................. 15
Period keys ............................. 9
Personal programming
   chart .............................. 11,12
Preprogrammed
   schedule ............... 9,10,11,12
Programming steps ......... 13,14
Replacing batteries .............. 6,7
Saturday
   program ......... 10,11,12,13,14
Set cooling temperatures ..... 14
Set present day .................... 13
Set present time ................... 13

Set fan switch ....................... 28
Set cooling temperatures ..... 14
Set heating temperatures ..... 13
Setting limits .................... 11,12
Sunday
   program ......... 10,11,12,13,14
System switch ....................... 29
Switch,fan ............................. 28
Switch, system ...................... 29
Table of Contents ................... 1
Temporary program

changes ........................... 15

Time ...................................... 13
Time period .............. 9,10,11,12
Troubleshooting ..... 30,31,32,33
Warranty ............................... 36
Weekday
   program ........... 9,10,11,13,14

34

69-0733—3

■

Allow time for the furnace to heat up and the fan to come on

before checking for heat at the register. Note that on most gas

and oil systems, the fan is not controlled by the thermostat, but
by another control, which may account for the delay.

■

Readjust according to instructions on pages 18 and 19.

■

Check that the wiring hole in the wall behind the wallplate has

been plugged with insulation to prevent drafts that might

adversely affect thermostat operation.

±

°

■

Be aware that it is normal for the current setting and display
temperature to differ occasionally.

■

Make sure the hole behind the thermostat is plugged with

insulation to help prevent drafts from adversely affecting the

thermostat operation.

■

The thermosat is factory-calibrated and cannot be adjusted.