Multiquip QP-202TH ユーザーズマニュアル

1. Place the engine 

fuel valve lever (Figure 6) to the "ON"

position.

DO NOT attempt to operate the pump until the Safety, General
Information and Inspection sections of this manual have been
read and  thoroughly understood.

2. Move the 

throttle lever (Figure 7) away from the slow

position, about 1/3 of the way toward the fast position.

3. Place the

 choke lever (Figure 8) in the "OPEN " position if

starting a 

cold engine.

4. Place the

 choke lever (Figure  9) in the "CLOSED " position

if starting a 

warm engine or the temperature is warm.

5. Place the

 engine ON/OFF switch (Figure 10) in the "ON "

position.

This section is intended to assist the operator with the 

start-up of the trash pump.  It is extremely important that this
section be read carefully before attempting to use the pump in
the field.