Motorola 6809494A40-O ユーザーズマニュアル
4
Removing the Module from your Eyewear
To remove the module from your frames:
1
Hold the body of the module in your right
hand.
hand.
2
Hold the arm of the eyewear frame that
the module is attached.
the module is attached.
3
Gently twist the module until the clamp
snaps open and you can remove it from
the frame.
snaps open and you can remove it from
the frame.
Pairing
RAZRWIRE
™
with your Phone
You must pair (or bond) your RAZRWIRE module with your phone before they will
work together. This procedure only needs to be performed once and then the next
time you turn on your RAZRWIRE module and phone they will automatically pair.
work together. This procedure only needs to be performed once and then the next
time you turn on your RAZRWIRE module and phone they will automatically pair.
To pair your module and phone:
1
On your Motorola phone*, select
M (Menu) > Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
2
With the module turned off, press and
hold the Multifunction Button until
you hear a high-pitched tone in the
ear speaker.
hold the Multifunction Button until
you hear a high-pitched tone in the
ear speaker.
Note: When the module is
successfully in pairing mode the
indicator light will remain solidly lit.
successfully in pairing mode the
indicator light will remain solidly lit.
3
The phone lists all Bluetooth devices it finds.
Select Oakley RAZRWIRE.
4
Select OK or Yes to pair (bond) the headset.
5
Enter the passkey: 0000
6
Select OK.
7
When your RAZRWIRE is successfully paired with your phone, the Indicator
Light flashes ten times and automatically turns on for use.
Light flashes ten times and automatically turns on for use.
*These steps are for most Motorola phones. For other phones, see your phone
user's guide.
user's guide.
Multifunction
Button
Button
Indicator
Light
Light
Volume
Up
Up
Volume
Down
Down
Microphone