NAD C545BEE ユーザーズマニュアル

1  StandbY:  Press this button to switch ON the C 545BEE. The Standby 

LED indicator will turn from amber to blue and illuminate the Vacuum 
Fluorescent Display (VFD).  Pressing the Standby button again turns the 
unit back to standby mode.

  The C 545BEE can also be switched ON from standby mode by pressing 

[OPEN/CLOSE] or [PLAY/PAUSE] buttons on the front panel as well as on 
the remote control. 

  If the disc tray is open and the Standby button is pressed, the disc tray 

will draw close and the C 545BEE goes to standby mode.

2  StandbY led:  This indicator will light up amber when the C 545BEE 

is in standby state. When the C 545BEE is at ON state, this indicator will 
illuminate blue.

3  diSc traY: With the disc tray open, insert a CD or other compatible 

media disc face down onto the tray. 

  “No Disc” appears on the C 545BEE’s VFD if the disc is placed upside 

down or there is no disc loaded.

NOTE

4  open/cloSe: Press this button to open and close the disc tray. When 

in standby mode, pressing this button will also switch ON the C 545BEE 
and at the same time open the disc tray. 

5  plaY/pauSe: This dual-function button alternates between starting 

and stopping playback. Press this button to toggle between Play 
and Pause of a CD or other compatible media disc. Press to start play 
or resume play after Pause. The icon [   ] is illuminated in the VFD 
indicating the C 545BEE is in playback mode. If the disc tray is open, 
press this button to automatically close the tray and start playback if a 
disc is loaded. 

  During playback, press this button to stop playback temporarily, 

keeping the optical pickup at its current position on the disc.  The icon 
[   ] is illuminated in the VFD indicating the C 545BEE is in pause mode. 
To resume playback at the exact point where it stopped, press [PLAY/
PAUSE] again.

6  Stop: Press the [STOP] button once to stop playback and re-set the 

pickup to the beginning of the disc. The display reverts to showing 
the number of tracks and total playing time on the disc; for WMA/MP3 
files, the display will revert to total number of files. If the C 545BEE was 
programmed to play a selection of tracks, the program will be retained 
in the player’s memory. Pressing [STOP] twice at program mode will 
delete the program. 

  Repeat and Random playback mode can be disengaged by pressing 

the [STOP] button.

7  random:  This button when pressed will engage or disengage random 

playback mode. When engaged (a corresponding “RANDOM” icon is 
illuminated in the VFD), random playback of tracks or files will begin 
by pressing [PLAY/PAUSE] from STOP mode or [SKIP 

 ] during 

playback mode. Press [RANDOM] again to return to normal playback 
(“RANDOM” icon in the VFD is extinguished).  Random playback mode can 
also be disengaged by pressing [STOP] button.

  The Random playback mode can be used in combination with the 

Repeat Play All mode but not with Program playback mode.