Tektronix TDS524A ユーザーズマニュアル

TDS 520A, 524A, 540A, & 544A Performance Verification

2Ć15

Warranted Characteristics

This subsection lists the

electrical and environmental warranted

characteristics that describe the TDS 520A, 524A, 540A and 544A Digitizing
Oscilloscopes.

Warranted characteristics

are described in terms of quantifiable performance

limits which are warranted.

NOTE

In these tables, those warranted characteristics that are checked in
the procedure Performance Verification, found in Section 1, appear
in boldface type under the column Name.

As stated above, this subsection lists only

warranted characteristics. A list of

typical characteristics starts on page 2-21.

The electrical characteristics found in these tables of warranted characteris-
tics

apply when the scope has been adjusted at an ambient temperature

between +20

C and +30

C, has had a warm-up period of at least 20 min-

utes, and is operating at an ambient temperature between +4

C and +50

(unless otherwise noted).

Table 2-8: Warranted Characteristics — Signal Acquisition System

Name

Description

Accuracy, DC Gain

(For all sensitivities from 1 mV/div to 10 V/div with offsets from 0 V to

V.)

Accuracy, Offset
TDS 540A and 544A (all channels),
TDS 520A and 524A (CH1 and CH2)

Volts/Div Setting

1 mV/div – 99.5 mV/div

100 mV/div – 995 mV/div

1 V/div – 10 V/div

Offset Accuracy

Net Offset

+ 1.5 mV +

0.1 div

volts/div setting)

Net Offset

+ 15 mV +

0.1 div

volts/div setting)

Net Offset

+ 150 mV

+ 0.1 div

volts/div setting)

Accuracy, Offset
TDS 520A and 524A (AUX1 and
AUX2)

Offset Accuracy

Net Offset

+ 0.1 div

volts/div setting)

Performance
Conditions