Meyer Sound 100 ユーザーズマニュアル

22

To floor mount an Acheron or Acheron LF:

1. Remove the two 3/8-16 x 1.5-inch screws at the bottom 

of each loudspeaker side (four total).

2. Secure the left bracket to the left side of the loudspeaker 

with two of the removed screws and two of the included 
flat washers.

■

To mount the loudspeaker at 0 degrees with no downtilt 
or uptilt, use the bottom bracket holes.

■

To mount the loudspeaker with downtilt, orient the 
bracket with the large end toward the rear of the loud-
speaker. For available downtilt angles, see “Floor Mount 
Downtilt Angles” on page 23.

■

To mount the loudspeaker with uptilt, orient the bracket 
with the large end toward the front of the loudspeaker. 
For available uptilt angles, see “Floor Mount Uptilt 
Angles” on page 23.

3. Repeat the previous step with the right bracket and the 

remaining two screws and washers.

4. Secure the brackets to the floor with fasteners (not 

included) appropriate for the floor surface.

The Acheron floor mount brackets can mount loudspeakers 
with downtilt or uptilt. Available angles are 3-18 degrees in 
3-degree increments. The direction in which the brackets are 
oriented determines whether the loudspeaker can be 
mounted with downtilt or uptilt.

When using the floor mount brack-

ets with an Acheron LF that will also have an 

Acheron stacked on top of it, mount the Acheron LF 
at 0 degrees using the bottom bracket holes.

Front