Meyer Sound 80 ユーザーズマニュアル

24

One Acheron can be stacked on top of the Acheron LF and 
secured with the Acheron stacking brackets. The stacked 
Acheron can be mounted with downtilt and uptilt angles of 
0–16 degrees.

The orientation of the Acheron to the 

Acheron LF with the stacking bracket was 

carefully optimized to minimize any acoustical arti-
facts between the loudspeakers, as well as between 
the loudspeakers and baffle walls.

When stacking an Acheron on top 

of an Acheron LF, the Acheron LF must be 

secured to the floor with the floor mount brackets. 
Floor mount the Acheron LF at 0 degrees using the 
bottom bracket holes.

The Acheron stacking bracket kit (PN 40.188.025.01) 
includes the following parts.

The 3/8-16 x 1.5-inch screws required 

for securing the stacking bracket to the 

Acheron LF are shipped with the Acheron LF installed 
in the top two screw holes on each side of the unit 
(four total).

To stack an Acheron on top of an Acheron LF:

1. Secure the Acheron LF to the floor with the floor mount 

brackets at 0 degrees using the bottom bracket holes. 
For more information, see “Floor Mounting Acherons and 
Acheron LFs” on page 22.

2. Stack the Acheron on top of the Acheron LF.

Optionally place two 1  x 2-inch wood 

pieces (not included) across the top of the 

Acheron LF, between it and the Acheron. The result-
ing extra space between the loudspeakers will make 
it easier to align the Acheron screw holes with the 
brackets.

Acheron stacking bracket (left)

45.188.043.01

1

Acheron stacking bracket (right)

45.188.044.01

1

3/8-16 x 1.5” shoulder screws

101.507

4

Large 1/2” flat washers

113.531

4

Small Flat washers

113.509

4

1” x 2” wood 

pieces