McIntosh CS100 ユーザーズマニュアル

3

Safety Instructions ............................................................2

Thank You and Please Take a Moment .............................2

Technical Assistance and Customer Service ....................2

Table of Contents ..............................................................3

Important Information ......................................................3

Performance Features .......................................................3

Dimensions .......................................................................4

Installation ........................................................................4

Installing the Loudspeaker ...............................................5

Warranty ...........................................................................7

Specifications ....................................................................8

1. Loudspeaker Cables of adequate size are important 

to ensure there will be no significant power loss or 

heating. Cable size is specified in Gauge numbers or 

AWG (American Wire Gauge). The smaller the Gauge 

number, the larger the wire size:

If the Loudspeaker Cables are 25 feet (7.62m) or less, 

use at least 18 Gauge (AWG) wire size or larger.

If the Loudspeaker Cables are 50 feet (38.1m) or less, 

use at least 14 Gauge (AWG) wire size or larger.

If the Loudspeaker Cables are 100 feet (76.2m) or 

less, use at least 12 Gauge (AWG) wire size or larger.

The Loudspeaker Connection Terminals can accept up 

to 12 Gauge (AWG) wire.

2. For additional connection information, refer to the 

owner’s manual(s) for any component(s) connected to 

the CS100 Loudspeaker System.

3. When the CS100 Loudspeaker System is driven by more 

than one amplifier, the output levels of the different am-

plifiers connected to the Loudspeaker System must be 

adjusted to achieve a proper balance between the low 

and the midrange/high frequencies reproduced. This 

adjustment is best achieved through the use of audio 

test equipment operated by a qualified installer.

4. When the symbol illustrated here is located on the prod-

uct or on the packaging, it indicates the product must 

not be disposed of with your other house-

hold waste. Instead, it is your responsibil-

ity to dispose of your waste equipment by 

handing it over to a designated collection 

point for the recycling of waste electrical 

and electronic equipment. The separate 

collection and recycling of your waste 

equipment at the time of disposal will help to conserve 

natural resources and ensure that it is recycled in a 

manner that protects human health and the environ-

ment. For more information about where you can drop 

off your waste equipment for recycling, please contact 

your local city office, your household waste disposal 

service or the McIntosh Dealer where you purchased 

the product.

  

1

 U.S. Patent number 7171013

The McIntosh CS100 Loudspeaker System uses the pat-

ented

1

 unique Loudspeaker System design allowing the 

baffle to be rotated up to 357° to direct the sound toward 

the listener to maintain proper sound stage.

The Boundary Compensation Circuitry in the crossover 

network enhances placement flexibility when the CS100 is 

located near sidewalls or corners.

The 3-way Loudspeaker System uses no more space than 

a typical 2-way System. When positioned near the rear 

or side walls of a room, the CS100 wide dispersion sound 

characteristics can be directed towards the side or rear of 

the seating position for direct-radiating surround sound or 

reflected off the side or rear wall to create a diffuse sound 

field surround.

The CS100 Loudspeaker Elements and Crossover Compo-

nents allow for use with amplifiers up to 200 watts.

In additional to the regular connections, the CS100 Loud-

speaker System provides separate connections for Bi-Am-

plification hookups.

The CS100 input connectors are gold plated for superior 

corrosion resistance and high electrical conductivity.