Marantz 541110307024M ユーザーズマニュアル

ENGLISH

Before using the remote controller for the fi rst time, 
load the batteries in the remote controller. The 
batteries provided are used to verify the operations 
of the remote controller only.

 

  Remove the battery cover.

 

  Paying close attention to polarity indicators 

(

ª plus and · minus), be sure to insert 

batteries correctly and as indicated. 

 

  Return the battery cover to its original 

position.

Misusing batteries can lead to fi re, injury or soiling 
of surrounding area as a result of leakage, rupture 
or corrosion. 
Carefully read the following precautions before 
using batteries.

•  Insert the batteries while ensuring that their 

ª and · poles are properly aligned with 
the corresponding markings on the remote 
controller.

•  Batteries of the same size and shape may have 

different voltages. Do not use any battery except 
the type indicated. Do not use old and new 
batteries together, and do not use different types 
of batteries together.

•  Do not recharge batteries.

•  Keep batteries out of the reach of children. Seek 

medical attention if accidentally ingested.

•  Do not carry or store batteries together with 

metal ball point pens, necklaces, coins, hair pins, 
etc.

•  If you will not be using the remote controller for 

an extended time (1 month or more), remove the 
batteries to prevent leakage. If batteries leak, do 
not touch the fl uid with bare hands. Wipe away 
any fl uid in the case and put in new batteries. 
When doing so, handle with care, because fl uid 
on skin or clothing presents a burn risk. If you 
accidentally get fl uid on your skin, immediately 
wash with water and seek medical attention. 

•  Do not heat or take apart batteries or put them in 

fl ame or water. 

•  When disposing of used batteries, please 

comply with governmental regulations or 
environmental public instruction’s rules that 
apply in your country or area.

•  Do not expose the batteries to excessive heat 

such as direct sunlight, fi re or the like.

Operate the unit with the remote controller within 
the range of the illustration below.

Approx. 5m (16.4 ft)

•  Do not allow direct sunlight, an inverter fl uorescent 

light or other strong source of light to shine onto 
the unit’s infrared signal reception window 
(remote sensor).  Otherwise, the operation of the 
remote controller may be disabled.

•  Bear in mind that operating the remote controller 

may cause other devices operated by infrared 
rays to be operated by mistake.

•  The remote controller cannot be operated if 

the space between the controller and the unit’s 
remote sensor is obstructed.

•  Do not place any objects on top of the remote 

controller. Doing so may cause one or more 
buttons to be held down which will cause the 
batteries to run down.

CC4003_U_01_Eng.indd   3

CC4003_U_01_Eng.indd   3

09.8.24   4:08:48 PM

09.8.24   4:08:48 PM