Marantz PM-11S3 ユーザーズマニュアル

12

ENGLISH

n High frequency range

The high frequency range can be trimmed in 2 dB steps across 

a –8 – +8 dB range. When the unit is shipped from the factory, 

the level is set to 0.0 dB. Before making this adjustment, press 

TONE on the unit or the remote control to set the tone control 

to on.

The unit enters the level adjustment 

mode.

The adjustment mode selects the 

high frequency range.

df

• If not operated for 15 seconds, the current setting is saved 

and the display returns to normal.

Before making the adjustment for level and tone, press MODE/

AMP to set its control mode to amplifier.

n Left and right channel balance

The volume level of the left and right channels can be trimmed 

in 0.5 dB steps across a 0.0 – 9.0 dB range. When the unit is 

shipped from the factory, the volume level is set to 0.0 dB 

(maximum).

The unit enters the level adjustment 

mode.

• The left channel level value flashes.

df

1

The adjustment mode selects the right channel.

• The tight channel level value flashes.

df

The unit exits the adjustment mode.

• If you have connected a “SLAVE” device using the F.C.B.S. 

connection (

vpage 14), proceed to the slave setting.

n Low frequency range 

The low frequency range can be trimmed in 2 dB steps across 

a –8 – +8 dB range. When the unit is shipped from the factory, 

the level is set to 0.0 dB. Before making this adjustment, press 

TONE on the unit or the remote control to set the tone control 

to on.

The unit enters the level adjustment 

mode.

The adjustment mode selects the 

low frequency range.

df

• If not operated for 15 seconds, the current setting is saved 

and the display returns to normal. 

1.PM-11S3U_ENG_0521.indd   12

2012/05/21   19:03:32