Marantz M-CR610 ユーザーズマニュアル

86

To use this unit by connecting it to a home network (LAN), you must configure network settings.

If you set up your home network via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network.

If you assign an IP address for each device, you must use the “IP Address” setting to assign an IP address to this unit and enter the information about 

your home network such as the gateway address and subnet mask.

Display network information.
Friendly Name / DHCP On or Off / IP Address / MAC Address / SSID

z

 

z This is displayed only while a Wi-Fi connection is enabled.

Enables network communication in standby power mode.
On :  Network is on during standby. Main unit operable with a network 

compatible controller.

Off (Default) :  Suspend network function during standby.

%

• Set to “On” when using the web control function or a network compatible 

controller.

• When “Network Control” is set to “On”, it consumes more standby power.

The Friendly Name (personalized name) is the name of this unit displayed 

on the network.

2 Select Name

Selects Friendly Name from the list.
AV Room / Bedroom / Dining Room / Family Room /  

Guest Room / Kids Room / Kitchen / Living Room / Office /  

Marantz M-CR610 (Default) / Other

• When you select “Other”, you can change the Friendly Name 

according to your preferences.

%

• The default Friendly Name on first use is “Marantz M-CR610”.
• Up to 63 characters can be input.
• For character input, see page 80.