Samsung SPD-3310 ユーザーズマニュアル
SPEED DOME CAMERA
User’s Manual
72
SPEED DOME CAMERA
User’s Manual
73
Alarm Setting
Alarm Enable
OFF
②
Alarm Input
③
Alarm Output
④
Aux Output
AUX Output
On/Off
OFF
Time
00 SEC
Main Menu
①
Camera Setting
②
Sequence Setting
③
P/T Setting
④
OSD Setting
⑤
Alarm Setting
⑥
Initialize
Status
➡
➡
25.3. Aux Output
▶
Main Menu/Alarm Setting/Aux Output
•ConnectingthepowerconnectorandGNDincorrectlytotheAuxterminal’sNOandCOM
ports may cause a short circuit and fire, damaging the camera.
•Themaximumpowercapacityofthebuilt-inrelayis30VDC/2A,125VAC/0.5A,and
250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera’s
lifespan and damage it.
Notes
AUX Output menu is to operate the camera’s peripheral
devices such as lamps and sirens through the controller and
switches as well as through network communications.
devices such as lamps and sirens through the controller and
switches as well as through network communications.
On/Off :
- Cancels or activates the Aux function.
Time :
Enables setting up a duration for the Aux output when the
Aux command is transmitted from the controller. A
duration can be selected from a minimum of 1 second to a
maximum of 60 minutes.
duration can be selected from a minimum of 1 second to a
maximum of 60 minutes.
⇨
NO
COM
AUX Off
NO
COM
AUX On
Functional Description
Functional Description
Main Menu
①
Camera Setting
②
Sequence Setting
③
P/T Setting
④
OSD Setting
⑤
Alarm Setting
⑥
Initialize
Status
26. Initialization Menu
▶
Main Menu/Initialize
Power On Reset :
Restarts the camera.
Factory Default :
Enables resetting the camera to its factory default settings.
When the mode is selected, all custom data such as preset
locations is deleted from the camera.
locations is deleted from the camera.
Use this function if it is necessary to reset the settings of
the camera.
Camera Default :
This mode can be used if the camera module has been
replaced and you want to keep the camera's existing
settings for the new module.
settings for the new module.
To do reset the camera, first replace the old module with a
new camera module. When the replacement is properly
installed, turn on the module, then execute this command.
installed, turn on the module, then execute this command.
Auto Refresh :
Enables optimizing the status of the camera’s built-in
electric circuits and components on a regular basis. (A
regular operation can be scheduled.)
regular operation can be scheduled.)
This mode can be used to maintain and repair the current
settings of the camera when anomalous operations occur:
e.g. The camera happened to directly face a light source, or
the settings have been canceled after the camera
repeatedly rotated in all four directions for a long time to
monitor a specific location.
e.g. The camera happened to directly face a light source, or
the settings have been canceled after the camera
repeatedly rotated in all four directions for a long time to
monitor a specific location.
The default setting is Off.
- Off, 1~7 Days: Selecting Off disables Auto Refresh and but
- Off, 1~7 Days: Selecting Off disables Auto Refresh and but
automatically executes it after 1~7 Days days has passed.
action once the refresh is complete.
action once the refresh is complete.
Initialize
①
Power On Reset
②
Factory Default
③
Camera Default
Auto Refresh
OFF
⑤
Auto Track Default
➡
Initialize