Samsung SC-D375(H) ユーザーズマニュアル
ENGLISH
Connection
Recording (Copying) a TV Program or Video Tape onto a Camcorder Tape (SC-D975 only)
71
71
✤ The Recording (Copying) function works only in <Player> Mode.
➥ page 19
✤ Connect your Camcorder to a VCR or a TV using the AV jack to record a TV
program or copy a video tape onto a Camcorder tape.
✤ Set the <AV In/Out> to <In> before Recording (Copying). ➥ page 69
Recording (Copying) onto a Camcorder Tape
1. Get your TV or VCR ready.
2. Connect the Camcorder to your VCR or TV with the Audio/Video cable.
Recording (Copying) onto a Camcorder Tape
1. Get your TV or VCR ready.
2. Connect the Camcorder to your VCR or TV with the Audio/Video cable.
■
Connect the Audio/Video cable to the output jack on your VCR or TV
■
The yellow jack: Video
■
The white jack: Audio (L)- Mono
■
The red jack: Audio (R)
3. Insert an empty tape in your Camcorder.
To record from a VCR
4. Insert the video tape to be played in your VCR.
■
Pause at the starting point of playing.
5. Start copying by pressing the [Record Start/Stop] button on your Camcorder.
6. Press the PLAY button on your VCR to play the tape.
6. Press the PLAY button on your VCR to play the tape.
To record from a TV
4. Select a TV channel to be recorded.
5. Start recording by pressing the [Record Start/Stop] button on your Camcorder.
5. Start recording by pressing the [Record Start/Stop] button on your Camcorder.
When Recording (Copying) is Complete:
Press the [
■ (Stop)] button on your Camcorder to stop recording (copying).
[ Notes ]
■
If you operate the Camcorder connected to another device, always connect the Camcorder to an AC outlet using the AC
power adapter.
power adapter.
■
Copy-protected video tapes such as Macrovision or unstable TV signals cannot be recorded on this camcorder.
Camcorder
Audio/Video Cable
Signal flow
VCR
or
TV
Audio/Video
Cable
SC-D371/D372
SC-D375(H)/D975
œ
œ
01227A SCD371 USA~071 2/1/07 9:39 AM Page 71