Multiquip C1870300404 ユーザーズマニュアル

1. Perform steps 1 through 6 in the 

Before Starting  section

as outlined in the 

Manual Starting Procedure.

2. Place the 

engine speed switch (Figure 54) in the HIGH

position

4. Continue operating the generator as s outlined in the

Manual Start-up procedure (start at step 5).

When running the generator in the AUTO mode, remember
the generator can start up at any time without warning.
NEVER attempt to perform any maintenance when the
generator is in the auto mode.

When starting generator in AUTO mode use the "

Start-up" procedure except where noted (see below).

The 

Engine Speed Switch must be set to the “High”

position when running in the 

Auto-Start mode. Failing to

set the switch in the proper position can result in damage
to your generator when it turns on.

3. Place the 

MPEC Control Switch (Figure 55) in the AUTO

position

When the MPEC 

control switch is placed in the AUTO

position,  the engine glow plugs will be warmed and the
engine will start automatically.