Samson L3200 ユーザーズマニュアル

15

Using the USB I/O
The L series consoles have a built-in stereo USB 

audio interface allowing you to record and playback 

from a PC using virtually any digital recording 

software. In addition, the L series consoles feature 

powerful routing options that let you route your USB 

digital recording and playback.

Connecting the L series to your computer is a simple 

procedure that takes just a few minutes.  Since the 

L Series consoles are USB compliant, you can use 

either a MAC or PC, connect the included USB cable 

and plug IN and play. You will be able to control your 

L series using the standard audio interface controls 

in the MAC or Windows operating system. You will 

find detailed instructions on setting up with MAC 

OS and Windows in the following sections of this 

manual.
Getting Started with Windows XP 
1. The first time you plug the L series into a USB port, 

Windows will install the universal drivers for that 

port.  A balloon tip will pop up, telling you it has 

found the USB Audio codec (figure 1).

2. When it is finished installing the drivers, it will say 

“Your new hardware is installed and ready to use” 

(figure 2).
Note: This balloon will not pop up again for the same 

USB port.

3. Most of the time, you’ll want the output volume 

from the computer at the maximum position, but 

sometimes it defaults to the middle of the slider, 

making the output very quiet.  The volume can be 

increased in several ways.  The simplest is to click the 

loudspeaker icon (figure 3) in the system tray and 

drag the slider to the top (figure 4).

4. If the icon is not there, the volume can be changed 

by going to Control Panel and opening Sounds and 

Audio Devices (figure 5).