Agilent Technologies 42A ユーザーズマニュアル
4-43
MegaZoom Concepts and Oscilloscope Operation
To turn the label display on or off
To turn the label display on or off
1 Press the
Label
key in the Digital section of the front panel.
This turns on display labels for the analog and digital channels. When the
Label
key is illuminated, the labels for displayed channels are displayed on the left
side of the displayed traces. When labels are on, the label is also displayed in
softkeys for the selected channel or source. The figure below shows an example
of the default labels assigned when you turn the label display on. The channel
labels default to their channel number.
side of the displayed traces. When labels are on, the label is also displayed in
softkeys for the selected channel or source. The figure below shows an example
of the default labels assigned when you turn the label display on. The channel
labels default to their channel number.
2 To turn the labels off, press the
Label
key until it is not illuminated.