Mentor v8.6_4 ユーザーズマニュアル

FastScan and FlexTest Reference Manual, V8.6_4

Tools Supported: DFTInsight, FastScan, and FlexTest

Scope: All modes

SET GAte REport {Normal | Trace | Error_pattern | Fault_status | Bist_data |

TIe_value | Constrain_value | Seq_depth_data | Clock_cone pin_name |
{Drc_pattern procedure_name [-All | time]} | {Parallel_pattern
pattern_number} | {CApture_pattern [n | All]}}

SET GAte REport {Normal | Race | Trace | Error_pattern | TIe_value |

Constrain_value | Clock_cone pin_name | Analysis [Control | Observe] |
{Drc_pattern procedure_name [-All | time]} | Parallel_pattern
pattern_number | REcord {cycle_number | -All} | SImulation | CONTrol}

DFTInsight Menu Path:

Setup > Reporting Detail

Specifies the additional display information for the Report Gates command.

The Set Gate Report command controls the type of additional information that the
Report Gates command displays. Each Set Gate Report option causes the Report
Gates command to provide different details regarding the gates on which it
reports. This command also controls the information displayed for each instance
in the DFTInsight Schematic View area.

When you exit the Setup system mode, the trace and any rules-checking error
pattern results will not be available with the usage of this command.

For information on the format output by the different options in this command,
refer to the

 reference page.