Lorex Technology L20WD800 Series ユーザーズマニュアル

Hard Drive Replacement - Appendix #11

The System comes with a pre-installed Hard Drive, however the unit will work with a replacement 
single Hard Drive (up to 750GB). 

NOTE: Make sure that the System is OFF and the power cable has been disconnected before 
changing the Hard Drive. 

• Refer to the General Jumper Pin Setting on HDD Surface (generally located on a sticker on 

the top of the drive).

• Set the Jumper Pin Set to Master (1 Drive).

• Confirm the SATA Cable is securely connected within the System.

• Connect the SATA Data Cable to the Drive

• Connect the SATA Power Cable to the Drive.