Lorex Technology L20WD800 Series ユーザーズマニュアル
39
System Menu
DATE/TIME
• Date/Time - Sets the current system
Date and Time.*
• Date Format - Sets the Date Display
format (MM-DD-YYYY, YYYY-MM-DD,
etc.).
etc.).
• Time Format - Sets the Time Display
format to either 12 or 24 hour display.
• Network Time Server Setup -
Synchronizes the system to the
specified remote time server. Select the
SYNC button to connect to the remote
server and synchronize the time.
specified remote time server. Select the
SYNC button to connect to the remote
server and synchronize the time.
NOTE: Selecting the SYNC button will
attempt to connect to the NTP server. If the
server cannot be reached, a “Failure to
Connect” message appears.
attempt to connect to the NTP server. If the
server cannot be reached, a “Failure to
Connect” message appears.
• Timezone Setup - Selections for the
local Time Zone (i.e. EST, CST, PST).
The DST (Daylight Savings Time) can
be set to ON/OFF.
The DST (Daylight Savings Time) can
be set to ON/OFF.
NOTE: MAKE SURE THAT THE DATE
AND TIME ARE SET PRIOR TO
RECORDING!
AND TIME ARE SET PRIOR TO
RECORDING!
System Menu
The System Setting controls contain:
DATE/TIME - Date and Time controls for the
system.
system.
NETWORK - Network and remote access
controls.
controls.
MAIL - Mail setup
USER MANAGEMENT - Controls for
system users.
system users.
SYSTEM MANAGEMENT - System specific
settings and controls
settings and controls
CONTROL DEVICE - Settings for an
external control device (such as a PTZ
Keyboard).
external control device (such as a PTZ
Keyboard).
DATE/TIME
If the Date/TIme is set into the past, a
message will appear warning that
Overlapped date(s) will be erased.
message will appear warning that
Overlapped date(s) will be erased.