Lorex Technology L20WD800 Series ユーザーズマニュアル

ページ / 118
61
VGA Mode (Mode 2)
VGA Mode (Mode 2)
VGA Mode is used to display a device (i.e. a Computer) connected to the VGA Port on the 
monitor. 
To view a Computer using the Monitor:
1. Connect the PC to the Monitor using a VGA 
Cable.
NOTE: VGA Cable is not included with the system.
2. Switch the Monitor to VGA mode using the 
Multi-Function Mode Button on the front of the Monitor, or 
by pressing the VGA Button on the Remote Control.
NOTE: Press the PIP button to display the DVR in the 
bottom right corner.
VGA Connection Errors
If the Computer is not correctly connected to the Monitor, 
several different error messages may be displayed:
Cable Not Connected
Indicates that the VGA cable 
has not been securely 
fastened to either the Monitor 
or PC.
No Sync or Signal: Indicates 
that the PC is not sending a 
good signal. Try changing 
modes on the PC.
Going to Sleep: Indicates 
that the Monitor is not 
receiving a signal from the 
PC, and is going into 
hibernation. This does not 
affect the DVR functions.