Lorex Technology L20WD800 Series ユーザーズマニュアル

Recommended Tips for System Setup - Appendix #5

1. Connect the DIN Extension Cable to an open 

channel port on the back of the System. Make 
sure that the ARROW on the cable is pointing 
up. This will align the pins on the cable 
correctly with the port on the stem, preventing 
the pins from becoming bent and the cable 
from becoming inoperable.

2. Connect one of the provided Cameras to the 

DIN Extension cable. Confirm that the arrows 
on the DIN Camera Cable and the DIN 
Extension cable are pointed together when 
connecting the cable. If the pins in the DIN 
Cable are bent, the Camera will NOT function

3.  Mount the camera to the desired surface (ceiling, wall, 

shelf, etc.). Connecting the cables BEFORE 
permanently mounting the stand will help prevent issues with cable length (camera is mounted 
too far from the system and cannot be connected).

4. Aim the camera at the desired location. Remember to REMOVE THE PROTECTIVE FILM from 

the lens of the camera by pulling on the plastic tab.

• Enter the MENU screen by pressing the MENU button. Enter the password (if required), 

and select the SYSTEM SETUP option. 

• The Setup Menu controls the System Settings, 

Recording Settings and Archive.

• Scroll through the options by pressing the UP, DOWN, 

LEFT and RIGHT buttons on the Front Panel or 
Remote Control. 

• To enter a sub-menu, navigate to the option 

and press the ENTER button. To exit a 
SUBMENU, press the RETURN button. 

• To exit the MAIN MENU, press the RETURN

button.