LaCie 526 ユーザーズマニュアル

LaCie 500 Series LCD Monitor 

OSD Control Menu Functions

User Manual 

page 37

The brightness of the LCD screen can be set to increase or de-
crease depending on the amount of ambient light in the room. If 
the room is bright, the monitor becomes correspondingly bright. 
If the room is dim, then the monitor will dim accordingly. The 
purpose of this function is to make the viewing experience more 
comfortable to the eye in a variety of lighting conditions.

The Auto Brightness function is set to OFF by default. When 
AUTO LUMINANCE is ON, this function is disabled.

Setup: Select the brightness range

Use the following procedure to select the Brightness Range that 
the monitor will use when the AUTO BRIGHTNESS function is 
activated.

1.  Set the BRIGHT level. This is the brightness level that the mon-

itor will go to when the ambient light level is at its peak. Make 
sure the room is at its brightest when setting this level. Select 
“1” in the AUTO BRIGHTNESS menu (

). Then use the 

front buttons to move the cursor up to the BRIGHTNESS set-
ting. Choose the desired BRIGHTNESS level (

2.  Set the DARK level. This is the lowest level of brightness that 

the monitor will go reach when the ambient light level is 
low. Make sure the room is at its darkest when setting this 
level. Then use the front buttons to move the cursor up to 
the BRIGHTNESS setting. Choose the desired brightness level 
(

).

  To access the AUTO BRIGHTNESS func-

tion, you must first access the Advanced OSD mode, TAG1 (

).  

Fig. 21 

Fig. 22 

Fig. 23 

continued on next page>>