Memorex MLT1912 ユーザーズマニュアル

Press the STANDBY button 1 to turn on the TV; the

STANDBY indicator will turn off. Press the SOURCE button
2 

to select the desired mode, TV (NTSC) or ATSC. Set the

desired reception mode (TV/CATV) as described on the

previous page. Press the MENU button 3; the Main Menu

screen will appear. 

Select Setup using the CHANNEL/Navigation UP 1 or

DOWN 2 button, then press the VOLUME UP/Navigation

Right button 3 to select it. Select Preset using the

CHANNEL/Navigation UP 1 or DOWN 2 button, then

press the VOLUME UP/Navigation Right button 3 to 

select it.

Select AUTO INSTALL using the CHANNEL/Navigation UP
1

or DOWN 2 button, then press the VOLUME

UP/Navigation Right button 3; the TV will automatically

cycle through all the channels and store active channels

into memory.

To Cancel AUTO INSTALL, press the MENU button 4.

Press the MENU button repeatedly when finished or wait

approx. 10 seconds to exit the menus.

NOTES: 

• If no buttons are pressed for approx. 10 seconds, the menu will disappear automatically.

• Searching for ATSC channels may take 15 minutes or more to complete. A progress status is displayed while the channel

list is being created.

• The TV will only search for the NTSC channels while in TV (NTSC) mode or it will just search for ATSC channels while in

ATSC mode.