Memorex MT1701 ユーザーズマニュアル

When the TV is set to the TV mode, the menu lets you customize the unit by allowing you

to change various settings as follows:

1. Press the MENU button on the main unit or the ® button 1 on the remote to access

the on-screen menu.

2. Select one of the options at the top of the screen (AUDIO, VIDEO, SYSTEM, C.C. or

V-CHIP) using the Navigation g 2 or c 3 button. 

3. Use the Navigation a 4 or e 5 button to select one of the setup options, then press

the Navigation g 2 or c 3 button to adjust it as per the following steps.

If AUDIO option is selected, you can set the following:

Adjust for best treble (high) response.

Adjust for best bass (low) response.

Adjust for best balance between the left and

right speakers. Usually setting this option in the middle is

optimal.

TREBLE

BASS

BALANCE

1

1

2

If VIDEO option is selected, you can set the following:

Adjusts the brightness of the image.

Adjusts the contrast of the image.

Adjusts the color intensity.

.Adjusts the red-green color balance of the unit.

Adjusts the sharpness of the image.

AUDIO   VIDEO   SYSTEM  C. C.    V-CHIP

BRIGHT

PICTURE

COLOR

HUE

SHARP

If SYSTEM option is selected, you can set the following:

Adjust the MTS setting to select the desired audio

option (STEREO, SAP or MONO). You can also select the

desired audio option using the remote, see page 25.

Select YES to mute the sound or NO for normal

sound. You can also mute the TV using the remote, see

page 25.

Select a language, which is used for the on-

screen display (ENGLISH, JAPANESE or CHINESE).

Select a desired sleep time of 30, 60 or 90

minutes. The TV will then turn off after the selected amount

of time.

Select CATV if using cable television or TV if

using an outdoor antenna.

Select YES to start auto channel scan (see

page 22).

Select YES to add a channel into memory

or NO to remove a channel from memory (see page 23).

Select YES to recall the original video setting.

AUDIO   VIDEO   SYSTEM  C. C.    V-CHIP