Marantz PD4292D ユーザーズマニュアル

Basic Operations

POWER

To turn the unit ON and OFF:

1. Plug the power cord into an active AC power outlet.

2. Press the POWER ON button (on the remote control-

ler) to turn on.

The monitor’s POWER/STANDBY indicator will light
up(green) when the unit is on.

3. Press the POWER OFF button (on the remote control-

ler or the unit) to turn off.

The monitor’s POWER/STANDBY indicator turns red
and the standby mode is set (only when turning off the
unit with the remote control).

VOLUME

To adjust the volume:

1. Press and hold the VOLUME ▲ button (on the remote

controller or the unit) to increase to the desired level.

2. Press and hold the VOLUME ▼ button (on the remote

controller or the unit) to decrease to the desired level.

MUTE

To cancel the sound:

Press the MUTE button on the remote controller to cancel

sound; press again to restore.

DISPLAY

To check the settings:

1. The screen changes each time the OSD button is

pressed.

2. If the button is not pressed for approximately three sec-

onds, the menu turns off.

DIGITAL ZOOM

Digital zoom specifies the picture position and enlarges
the picture.
1. Press the 4-D1(ON) button to display the pointer. ( )

To change the size of the picture:

Press the 2-D1(ZOM+) button and enlarge the pic-
ture.

The pointer will change to resemble a magnifying
glass. ( )

A press of the 2-D2(ZOM-) button will reduce the
picture and return it to its original size.

To change the picture position:

Select the position with the ▲▼

§ ©

buttons.

2. Press the 4-D1(ON) button to delete the pointer.

PD4292D-2

00.10.4, 3:11 PM