Microboards Technology Flash Duplicator ユーザーズマニュアル

 

5

The Copywriter Flash Duplicator allows you to make fast copies of USB flash cards.  This series 
is available in 3, 7, or 11 copy configuration.   

When unpacking your Copywriter Flash Duplicator system, the following items should be 
included: 

•  Copywriter Flash Duplicator  

•  Users Manual (this document) and Starter Kit 

•  Power Cord  

If any of these items are missing, please contact your distributor or Microboards Technology 
Technical Support:  

 

PH: 952-556-1639 

FAX: 952-556-1628 

support@microboards.com

 

www.microboards.com

 

 

PH: +44 (0) 845 230 7800 

www.microboards.co.uk

 

PH: 03-3561-2266 

www.microboards.co.jp

 

Please have the Model and Serial Number of your Copywriter Flash Duplicator available when 
contacting Technical Support.  

•  Connect the power cable to the Copywriter Flash Duplicator and plug in to a 

protected power outlet strip or UPS power supply. 

•  Turn on power to the duplicator. 

•  The system will go through initialization and then display:  1. Copy. 

•  The system is now ready to use. 

You should never unload any card that is in use by the duplicator.  If the green LED above the 
port is flashing, the card is in use. 

To load USB flash cards, slide the card into the port.  If it does not slide in easily, flip the USB 
card over and try again. 
To unload USB flash cards, simply pull them out of the port.