SBC comm SBC-350A ユーザーズマニュアル
Chapter 5 BIOS diagnostics and setup 33
unreliable.
From the main menu highlight the Advanced CMOS Setup option
and press <ENTER>. Press any key to clear the warning screen.
and press <ENTER>. Press any key to clear the warning screen.
Features
The following chart lists card settings which you can change in
Advanced CMOS Setup. It lists the default value for each setting.
This screen has several help screens, accessed by pressing the
<F1> key, which display setting options.
Advanced CMOS Setup. It lists the default value for each setting.
This screen has several help screens, accessed by pressing the
<F1> key, which display setting options.
Help Screen Options
Feature
Available options
Type Rate Programming
Disabled (default)
Enabled
Enabled
Type Rate Delay (msec)
250, 500 (default), 750,
1000
Type Rate (Chars/sec)
Type Rate (Chars/sec)
6, 8, 10, 12, 15 (default),
20,
24, 30
Above 1MB Memory Test
Disabled (default)
Enabled
Enabled
Memory Test Tick Sound
Enabled (default)
Disabled
Disabled
Memory Parity Error Check
Enabled (default)
Disabled
Disabled
Hit <DEL> Message Display
Enabled (default)
Disabled
Disabled
Hard Disk Type 47 RAM Area
0:300 (default)
DOS 1KB
DOS 1KB
This setting determines where in memory the hard disk infor-
mation is stored when you select hard disk type 47. If you
disable BIOS Shadow RAM, the Hard Disk Type 47 parameter
table will use regular RAM. There are two options, 0:300 (lower
system RAM) and DOS 1 KB (the top 1KB of 640 KB base
memory).
Wait for <F1> if Any Error
mation is stored when you select hard disk type 47. If you
disable BIOS Shadow RAM, the Hard Disk Type 47 parameter
table will use regular RAM. There are two options, 0:300 (lower
system RAM) and DOS 1 KB (the top 1KB of 640 KB base
memory).
Wait for <F1> if Any Error
Enabled (default)
Disabled
Disabled
System Bootup Num Lock
On (default)
Off
Off