Fujitsu D1931 ユーザーズマニュアル

Internal ports and connectors 

 

10 - English 

A26361-D1931-Z120-1-7419, Edition 1

 

Technical data 
Function: 

2D/3D graphics controller, Dynamic Video memory Technology, 400 Mhz 
integrated 24-bit RAMDAC 

Features: 

Display Data Channel (DDC), 2 DVO channels (up to 165 megapixels per 
channel), dual-view support for ADD2 boards 

 

Screen resolution 
Depending on the operating system used, the screen resolutions in the following table refer to the 
mainboard screen controller. 
If you are using an external screen controller, you will find details of supported screen resolutions in 
the operating manual or technical manual supplied with the controller. 

Screen resolution 

Refresh rate (Hz) 

Colour 

640 x 480 

120 

32 bit 

800 x 600 

120 

32 bit 

1024 x 768 

120 

32 bit 

1280 x 1024 

120 

32 bit 

1600 x 1200 

120 

32 bit 

1920 x 1440 

85 

32 bit 

2048 x 1536 

75 

32 bit 

 

The positions of the internal ports and connectors are shown on the Cover. Additional information on 
some ports is also provided here. 

An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for 
the ultra ATA/66 or ultra ATA/100 mode. 
► 

Connect the end of the cable marked with blue to the mainboard. 

A serial ATA/150 hard disk must be connected with a serial ATA cable. 
► 

Connect the cable to the hard disk and to the connector on the mainboard. 

If you have connected hard disks to serial ATA (one hard disk is possible per serial ATA 
connection), you must configure the respective settings in the BIOS Setup (further information you 

can find in the BIOS Setup manual).