Fujitsu D1931 ユーザーズマニュアル

  

34 - English 

A26361-D1931-Z120-1-7419, Edition 1

 

This chapter contains error messages generated by the mainboard. 

Available CPUs do not support the same bus frequency - System halted! 

Memory type mixing detected 

Non Fujitsu Siemens Memory Module detected - Warranty void 

There are more than 32 32 RDRAM devices in the system 

Check whether the system configuration has changed. If necessary, correct the settings. 

BIOS update for installed CPU failed 

This message appears if the microcode update required for the connected processor is not 
contained in the system BIOS. 

► 

Boot the system with the inserted Flash BIOS floppy disk. 

► 

Abort the normal Flash BIOS update by answering the question about whether you want to 
perform the update with 

n  ↵  

► 

To carry out the Flash BIOS update for the processor, enter: 

└┘

/p6  ↵  

Check date and time settings 

The system date and time are invalid. Set the current date and time in the Main menu of the 
BIOS Setup. 

CPU ID 0x failed 

Switch the server off and on again. If the message is still displayed, go into the BIOS setup and 

set the corresponding processor to Disabled in the Server - CPU Status menu; please contact 

your sales outlet or customer service centre. 

CPU mismatch detected 

You have replaced the processor or changed the frequency setting. As a result, the 
characteristic data of the processor have changed. Confirm this change by running the BIOS 
Setup and exiting it again. 

Diskette drive A error 

Diskette drive B error 

Check the entry for the diskette drive in the Main menu of the BIOS Setup. Check the 

connections to the diskette drive.