EVGA 123-YW-E175 ユーザーズマニュアル

nForce 750i SLI Motherboard

Be very careful when handling the CPU. Make sure not to bend or break any pins on the back. Hold 
the processor only by the edges and do not touch the bottom of the processor.

Use the following procedure to install the CPU onto the moth-
erboard.

1.   Unhook the socket lever by pushing down and away from 

the socket.

2.   Lift the load plate. There is a protective socket cover on 

the load plate to protect the socket when there is no CPU 
installed.

3.   Remove the protective socket cover from the load plate.

4.   Remove the processor from its protective cover, making 

sure you hold it only by the edges.

 

It is a good idea to save the cover so that whenever you 
remove the CPU, you have a safe place to store it.

5.   Align the notches in the processor with the notches on the 

socket.

6.   Lower the processor straight down into the socket with out 

tilting or sliding it into the socket.

Note:

 Make sure the CPU is fully seated and level in the 

socket.

7.   Close the load plate over the CPU and press down while 

you close and engage the socket lever.

There are many different fan types that can be used with this 
motherboard. Follow the instruction that came with you fan as-
sembly. Be sure that the fan orientation is correct for your chas-
sis type and your fan assembly. 

Align notches with
notches on the CPU