Havis-Shields DS-DELL-103 ユーザーズマニュアル
www.havis.com • 1-800-524-9900
1)
If previously locked, unlock Docking Station using supplied key.
2)
To release Latch Handle, press in the Lock, and the Latch Handle will spring
open to the Unlatched position.
Note: Red warning label on Latch Handle is visible when fully extended.
3)
Once unlatched, grab both sides of computer and carefully lift out of
Docking Station, rear end first.
5)
For theft deterrence, secure computer by locking Docking Station with
supplied key (Hardware Kit Item 2).
6)
Power on computer. The Laptop Power Button LED will illuminate blue to
indicate proper system function. Once docked, the Laptop Power Button may
be used to power computer on/off.
• FOR SAFE & PROPER SYSTEM FUNCTION, SPECIFIC DOCKING STATION MODELS
MUST BE USED WITH SPECIFIC DELL COMPUTER MODELS.
- DS-DELL-100 SERIES (101, 103, ETC.) DOCKING STATIONS ARE INTENDED FOR USE
WITH DELL E6400, E6410 & E6420 XFR COMPUTERS ONLY.
- DS-DELL-220 SERIES (221, 223) DOCKING STATIONS ARE INTENDED FOR USE
WITH DELL E6400, E6410, & E6420 ATG COMPUTERS ONLY.
- THE PORT COVERS SUPPLIED WITH DELL E6400 & E6410 ATG COMPUTERS
MUST BE REMOVED PRIOR TO DOCKING.
- THE PORT COVERS SUPPLIED WITH DELL E6420 ATG COMPUTER MAY
REMAIN SECURED TO COMPUTER WHILE DOCKING.
• COMPUTER & DOCKING STATION IDENTIFICATION:
10
3
Operation - Docking (continued)
Operation - Undocking
Lock
Laptop Power
Button / LED
Lock
Lock
Latch Handle
COMPUTER MODEL
DOCKING STATION
IDENTIFICATION
E6400/6410/6420 XFR
DS-DELL-100 Series
No Foot Pads on
top plate.
Low profile Front Hooks.
Low profile Front Hooks.
E6400/6410/6420 ATG
DS-DA-220 Series
Foot Pads on top plate.
Macro Alignment
Macro Alignment
Brackets attached.
• Do not place metal objects or containers of liquid on top of the Docking Station
• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
• Use only the specified Power Supply (Part # LPS-105) with this Docking Station
• Do not store the Docking Station where water, moisture, steam, dust, etc. are present
• Do not connect cables into ports other than what they are specified for
• Do not leave the Docking Station in a high temperature environment (greater than 75°C, 167°F)
for a long period of time
• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
• Use only the specified Power Supply (Part # LPS-105) with this Docking Station
• Do not store the Docking Station where water, moisture, steam, dust, etc. are present
• Do not connect cables into ports other than what they are specified for
• Do not leave the Docking Station in a high temperature environment (greater than 75°C, 167°F)
for a long period of time
Precautions
Rear
Front