Motorola CPCI-6020 ユーザーズマニュアル
Keyboard/Mouse Connector
Transition Module Preparation and Installation
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
149
7.9.9
Keyboard/Mouse Connector
The keyboard/mouse interface is provided by a 6-pin circular DIN connector. To use the
keyboard function only, a keyboard may be connected directly to this connector. To use both the
keyboard and the mouse functions, use the Y-adapter cable provided with the CPCI-6020-
MCPTM-01. Refer to the following table for pin assignments.
keyboard function only, a keyboard may be connected directly to this connector. To use both the
keyboard and the mouse functions, use the Y-adapter cable provided with the CPCI-6020-
MCPTM-01. Refer to the following table for pin assignments.
7.9.10
Sync/Async Serial Ports
The interface for the sync/async serial ports COM3 and COM4 is provided by a 50-pin female
connector. The connector shield for the port is tied to chassis ground. The pin assignments and
signal mnemonics are listed in the following table.
connector. The connector shield for the port is tied to chassis ground. The pin assignments and
signal mnemonics are listed in the following table.
Pin assignments for this connector change depending on which SIM is plugged into the
connector.
connector.
4
No Connect
Table 7-11 +5Vdc Power Connector (continued)
Pin
Signal
Table 7-12 Keyboard/Mouse Connector Pin Assignments
Pin
Signal
1
KBD DAT
2
MS DAT
3
GND
4
+5 VDC Fused
5
KBD CLK
6
MS CLK
Table 7-13 Sync/Async Serial Connector Pin Assignments
Pin
Signal
Signal
Pin
1
TXD3
TXD4
26
2
RXD3
RXD4
27
3
RTS3
RTS4
28
4
CTS3
CTS4
29
5
DSR3
DSR4
30
6
GND
GND
31
7
DCD3
DCD4
32
8
SP3_P9
SP4_P9
33
9
SP3_P10
SP4_P10
34
10
SP3_P11
SP4_P11
35