Motorola CPCI-6020 ユーザーズマニュアル

The following equipment is recommended to complete an CPCI-6020 system:

z

CompactPCI system enclosure (in compliance with CompactPCI Specification, PICMG 2.0, 
Rev. 2.1)

z

System console terminal

z

Operating system (and/or application software)

z

Disk drives (and/or other I/O) and controllers

z

Transition module (CPCI-6020-MCPTM-01) and connecting cables

CPCI-6020 modules are designed with front and rear panel I/O. Front panel I/O includes two 
USB ports, one Ethernet port (unless run to rear), a UART Port 0 and a PMC I/O port (if a PMC 
is installed). The rear panel I/O is provided via a CPCI-6020-MCPTM-01 Transition Module and 
includes two Ethernet ports (only port 2 is connected in standard product configuration. Contact 
custom solution center for connecting port 1 through custom build options), two USB ports, two 
UART ports (one may be run to front), and two synchronous COM ports.

You must make sure that the blade, when operated in your particular system configuration, 
meets the environmental requirements specified in the next section.

The following table lists the currently available specifications for the environmental 
characteristics of the CPCI-6020. A complete functional description of the CPCI-6020 
baseboard appears in 

Initialize the system clock.

Examine and/or change environmental 
parameters.

Program the board as needed for your 
applications.

CPCI-6020 CompactPCI Single Board Computer 
Programmer’s Reference Guide

Harrier Application Specific Integrated Circuit (ASIC) 
Programmer’s Reference Guide