Motorola CPCI-6020 ユーザーズマニュアル

The CompactFlash memory card mounts on the CPCI-6020 baseboard. To upgrade or install a 
CompactFlash memory card, refer to the next figure and proceed as follows:

1. Attach an ESD strap to your wrist. Attach the other end of the strap to the chassis 

(for proper grounding). The ESD strap must be secured to your wrist and to chassis 
ground throughout the procedure.

2. If you are installing the board in a non-hot swap chassis, perform an operating 

system shutdown. Turn the AC or DC power off and remove the AC cord or DC 
power lines from the system. Remove the chassis or system cover(s) as necessary 
to access the compact PCI module.

3. Carefully remove the CPCI-6020 from the CompactPCI card slot and place it on a 

clean and adequately protected working surface with connectors J1 through J5 
facing you.