Fujitsu 480 ユーザーズマニュアル
3-30
C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
CHAPTER 3 Web-UI Operations
Table 3.21 Button in the [Fans] window
(1) Menu operation
[System]
→
[Fans]
(2) GUI operation
1 Click the [Status Clear] button.
The [Fans Status Clear] window is displayed.
2 Follow the clearing process in the [Fans Status Clear] window.
The fan statuses are cleared.
3.2.9.1 Fans Status Clear window
Once an abnormality is detected in a fan, the fan remains in the abnormal status until
the fan is replaced or the abnormal status is cleared.
the fan is replaced or the abnormal status is cleared.
The abnormal status of a fan can be cleared using the [Fans Status Clear] window.
Note: After the abnormal status of a fan is cleared, if an abnormal fan speed is
detected in the fan, the fan is placed in the [Failed] status again. Clearing the
status of a fan with an abnormal fan speed does not change its status from
[Failed].
status of a fan with an abnormal fan speed does not change its status from
[Failed].
Status
Fan status:
• OK: Operating normally
• Not present: Not installed
• Failed: Fan failure
• Not present: Not installed
• Failed: Fan failure
Fan Speed(rpm)
Fan speed (rpm).
Threshold(rpm)
Lower limit of the fan speed (Any speed lower than this setting is
abnormal.)
abnormal.)
Button
Description
Status Clear
Click the [Status Clear] button to display the [Fans Status Clear]
window. This window enables clearing of the fan statuses.
window. This window enables clearing of the fan statuses.
Item
Description